|
|
|
 |
|
|
|
Electrodes and Accessories for Building Inspection
| 19-E/STC |
 |
- Two 120mm long blades, bent to a 35° angle
- Teflon coated w/ exposed tips
- Use to check behind trim and skirting
| |
| 21-E |
 |
- Two pins (insulated)
- 80mm penetration
- Use on EIFS, insulation and roofs
- Also available as a 21-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
- Also available as a 21-E/001 with 170mm pins for EIFS
| |
| 22-E |
 |
- Two pins
- 12mm penetration
- Use on plaster, masonry and wood
- Will also take #496, insulated pins, 30mm penetration
- Also available as a 22-ET with a tapped handle. This feature allows you to attach a threaded extension pole -- great for checking moisture in high and hard to reach places.
| |
| 26-ES |
 |
- Two pins
- 30mm penetration
- Use to measure moisture content in wood at different levels of penetration
- Ideal for shell and core tests to detect moisture gradients and to test timber with wet surfaces
- Also available as type 26-ED with depth gauge
- 26-ES Parts List
| |
| CS-2 sleeve |
| 50mm concrete sleeve |
| CS-3 sleeve |
| 75mm concrete sleeve |
| 608 pin |
| 100mm long, insulated, suits 21-E electrodes |
| 496 pin |
| 50mm long, insulated, suits 26-ES |
| 1849 pin |
| 30mm long, a shorter version of the #496 |
| A-111 pin |
| 25mm long, non insulated, suits 22-E |
| 2497 / A-100 |
| 8 mm long integral pins |
|
|
|
|
|
|
|
|
|
